3-Position Starter Switches
3-position switches are used on machines with a push button start and do not have a start post on the rear of the switch for a starter wire. These are Off-On switches only and do not have a spring return to run.
- With no spring return to run
- Heavy duty die-cast housing
- Molded bakelite terminal base
- Die-case base spun over for sealing
- Palnut nut and mounting nut included
- Mixed key codes or keyed alike depending on availability
Common Available Switch Characteristics
| TYPICAL RATINGS @ 14 VOLTS DC (50,000 CYCLES) | ||
| Ignition Terminal | Accessory Terminal | Start Terminal |
| 8 Amps | 30 Amps (Inductive) | 75 Amps Make 20 Amps Break |
| Continuous Current Carrying Capacity – 30 Amps @ 14V Accessory Terminal with #10 Gauge Wire |
||
Base Types and Connections
Mounting Hole Patterns
